View 2SK3274S_1198591.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

To all our customers
Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.) Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand names are mentioned in the document, these names have in fact all been changed to Renesas Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been made to the contents of the document, and these changes do not constitute any alteration to the contents of the document itself. Renesas Technology Home Page: http://www.renesas.com
Renesas Technology Corp. Customer Support Dept. April 1, 2003
Cautions
Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein.
2SK3274(L), 2SK3274(S)
Slilicon N Channel MOS FET High Speed Power Switching
ADE-208-960 (Z) 1st. Edition Mar. 2001 Features
* * * * Low on-resistance R DS(on) = 10 m typ. 4.5 V gate drive device High speed switching
External View
DPAK-2
4
4
D 2 12 G 1 3
3 S
12
3
1. Gate 2. Drain 3. Source 4. Drain
2SK3274(L), 2SK3274(S)
Absolute Maximum Ratings (Ta = 25C)
Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Avalanche current Avalanche energy Channel dissipation Channel temperature Storage temperature Symbol VDSS VGSS ID I D (pulse)* I DR I AP * 3 EAR*
3 2 1
Value 30 20 30 120 30 20 40 30 150 -55 to +150
Unit V V A A A A mJ W C C
Pch* Tch Tstg
Notes: 1. PW 10 s, duty cycle 1% 2. Value at Tc = 25C 3. Value at Tch = 25C: Rg 50
2
2SK3274(L), 2SK3274(S)
Electrical Characteristics (Ta = 25C)
Item Drain to source breakdown voltage Gate to source leak current Symbol Min V(BR)DSS I GSS 30 -- -- 1.5 18 -- -- -- -- -- -- -- -- -- -- -- -- -- -- Typ -- -- -- -- 30 10 20 1500 500 250 27 6 5 22 170 110 145 1.0 35 Max -- 0.1 10 3.0 -- 13 30 -- -- -- -- -- -- -- -- -- -- -- -- Unijt V A A V S m m pF pF pF nc nc nc ns ns ns ns V ns I F = 30 A, VGS = 0 I F = 30 A, VGS = 0 diF/dt = 50 A/s Test conditions I D = 10 mA, VGS = 0 VGS = 20 V, V DS = 0 VDS = 30 V, VGS = 0 VDS = 10 V, ID = 1 mA*1 I D = 15 A, VDS = 10 V*1 I D = 15 A, VGS = 10 V*1 I D = 15 A, VGS = 4.5 V*1 VDS = 10 V VGS = 0 f = 1 MHz VDD = 10 V VGS = 10 V I D = 30 A VGS = 10 V I D = 15 A RL = 2
Zero gate voltage drain current I DSS Gate to source cutoff voltage Forward transfer admittance Static drain to source on state resistance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate to source charge Gate to drain charge Turn-on delay time Rise time Turn-off delay time Fall time Body-drain diode forward voltage Body-drain diode reverse recovery time Note: 1. Pulse test VGS(off) |yfs| RDS(on) RDS(on) Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf VDF trr
3
2SK3274(L), 2SK3274(S)
Power vs. Temperature Derating 40 Pch (W) ID (A) 200 100 30 50 20 10 5 2 Operation in
this area is
DC Op
Maximum Safe Operation Area
10
10
PW
era
=1
n(
1m
0m s(
0
s
s
s
ho
Channel Dissipation
Drain Current
tio
20
Tc
1s
=2
t)
5
C)
10
1 limited by RDS(on) 0.5 Ta = 25C 0.2
0
50
100
150 Tc (C)
200
1
Case Temperature
2 5 10 20 Drain to Source Voltage
50 100 VDS (V)
Typical Output Characteristics 50 10 V ID (A) 40 6V 5V Pulse Test 4.5 V ID (A) 50
Typical Transfer Characteristics V DS = 10 V 40 Pulse Test
30 4V
30
Drain Current
20
Drain Current
20 Tc = 75C 10 25C -25C
10 V GS = 3.5 V 0 2 4 6 Drain to Source Voltage 8 10 VDS (V)
0
2 4 6 Gate to Source Voltage
8 10 VGS (V)
4
2SK3274(L), 2SK3274(S)
Drain to Source Saturation Voltage vs. Gate to Source Voltage Drain to Source Saturation Voltage VDS(on) (V) Pulse Test Drain to Source on State Resistance RDS(on) (m) 1.0 Static Drain to Source on State Resistance vs. Drain Current
0.05
0.8
0.02
VGS = 4 V
0.6
0.01
10 V
0.4
I D = 20 A 10 A 5A
0.005
0.2
0.002
Pulse Test 0.1 0.2 0.5 1 2 5 10 20 50
0.001
0
12 4 8 Gate to Source Voltage
16 20 VGS (V)
Drain Current
ID (A)
Static Drain to Source on State Resistance RDS(on) (m)
Forward Transfer Admittance |yfs| (S)
Static Drain to Source on State Resistance vs. Temperature 0.10 Pulse Test 0.08
Forward Transfer Admittance vs. Drain Current 50 20 10 5 2 1 0.5 0.1 V DS = 10 V Pulse Test 75C Tc = -25C
25C
0.06
0.04 V GS = 4 V 0.02 0 -40
5, 10, 20 A
10 V 0 40 80 120 Case Temperature Tc (C) 160
0.3
1
3
10 ID (A)
30
100
Drain Current
5
2SK3274(L), 2SK3274(S)
Body-Drain Diode Reverse Recovery Time 1000 Reverse Recovery Time trr (ns) 500 di / dt = 50 A / s V GS = 0, Ta = 25C Capacitance C (pF) 5000 2000 1000 500 200 Crss 100 50 20 10 0.3 1 3 10 30 100 Reverse Drain Current IDR (A) 0 VGS = 0 f = 1 MHz 10 20 30 Drain to Source Voltage 40 50 VDS (V) Coss Ciss Typical Capacitance vs. Drain to Source Voltage
200 100 50
20 10 0.1
Dynamic Input Characteristics VDS (V) VGS (V) 50 I D = 30 A 20 1000 300 Switching Time t (ns)
Switching Characteristics
40 V DD = 20 V 10 V 5V V DS V GS 10 V DD = 20 V 10 V 5V 8 16 24 32
16
t d(off) 100 tf 30 10 3 1 0.1 tr t d(on) V GS = 10 V, V DD = 30 V PW = 5 s, duty < 1 % 0.3 1 3 Drain Current 10 30 ID (A) 100
Drain to Source Voltage
30
12
20
8
4 0 40
0
Gate Charge
Qg (nc)
6
Gate to Emitter Voltage
2SK3274(L), 2SK3274(S)
Reverse Drain Current vs. Source to Drain Voltage 50 IF (A) Pulse Test 40 10 V Reverse Drain Current 30 5V Maximum Avalanche Energy vs. Channel Temperature Derating 40 I AP = 20 A V DD = 15 V duty < 0.1 % Rg > 50
EAR (mJ) Repetitive Avalanche Energy 2.0
32
24
20
V GS = 0, -5 V
16
10
8 0 25
0
0.4
0.8
1.2
1.6
50
75
100
125 Tch (C)
150
Source to Drain Voltage
VSDF (V)
Channel Temperature
Avalanche Test Circuit EAR = 1 2
Avalanche Waveform L I AP
2
VDSS VDSS - V DD
V DS Monitor
L I AP Monitor
V (BR)DSS I AP VDD ID V DS
Rg Vin 15 V
D. U. T
50 0 VDD
7
2SK3274(L), 2SK3274(S)
Normalized Transient Thermal Impedance vs. Pulse Width Normalized Transient Thermal Impedance s (t) 3 Tc = 25C 1 D=1 0.5 0.3
0.2
0.1 0.05
0.02
1
0.1
ch - c(t) = s (t) ch - c ch - c = 4.17C/W, Tc = 25C
uls e
PDM PW T
0.03
0.0
1s
h
P ot
D=
PW T
0.01 10
100
1m 10 m 100 m Pulse Width PW (S)
1
10
Switching Time Test Circuit Vin Monitor D.U.T. RL Vin Vin 10 V 50 V DD = 30 V Vout 10% 10% Vout Monitor
Waveform
90%
10% 90% td(off) tf
90% td(on) tr
8
2SK3274(L), 2SK3274(S)
Package Dimensions As of January, 2001
6.5 0.5 5.4 0.5 1.7 0.5
Unit: mm
2.3 0.2 0.55 0.1
4.7 0.5
16.2 0.5
3.1 0.5
1.15 0.1 0.8 0.1 (0.7)
5.5 0.5
1.2 0.3
0.55 0.1 2.29 0.5 2.29 0.5
0.55 0.1
Hitachi Code JEDEC EIAJ Mass (reference value)
DPAK (L)-(2) -- -- 0.42 g
9
2SK3274(L), 2SK3274(S)
As of January, 2001
1.7 0.5
Unit: mm
6.5 0.5 5.4 0.5 2.3 0.2 0.55 0.1 (4.9)
5.5 0.5
1.2 Max
0 - 0.25
1.15 0.1 2.5 0.5 0.8 0.1 2.29 0.5 2.29 0.5
0.55 0.1
Hitachi Code JEDEC EIAJ Mass (reference value)
(5.3)
DPAK (S)-(1),(2) -- Conforms 0.28 g
10
2SK3274(L), 2SK3274(S)
As of January, 2001
1.5 0.5
Unit: mm
6.5 0.5 5.4 0.5 2.3 0.2 0.55 0.1 (5.1)
(0.1)
(0.1)
5.5 0.5
1.2 Max
0 - 0.25
1.15 0.1 2.5 0.5 0.8 0.1 2.29 0.5 2.29 0.5
0.55 0.1
Hitachi Code JEDEC EIAJ Mass (reference value)
(5.1)
DPAK (S)-(3) -- Conforms 0.28 g
11
2SK3274(L), 2SK3274(S)
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica Europe Asia Japan
: : : :
http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm
Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk
For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160
Copyright (c) Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.
Colophon 2.0
12

▲Up To Search▲

Price & Availability of 2SK3274S

	To Download 2SK3274S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .